[car_upgrade] My Mi16-conversion Euro-style

[Swazy 0 1 Cars]

Its got to be worth checking the wires you've extended. It is a very confusing fault, as they spark occasionally there can't be much wrong.

 

Well i´ll put the loom out again and check for faults

[Swazy 0 1 Cars]

Well i´ll put the loom out again and check for faults

 

Quick question, is there power on all pins from coil pack at the same time if i turn keys on igntion??

[Swazy 0 1 Cars]

Quick question, is there power on all pins from coil pack at the same time if i turn keys on igntion??

 

Could somebody check this on his mi16? would halp me a lot

Thanks

[Swazy 0 1 Cars]

Could somebody check this on his mi16? would halp me a lot

Thanks

 

Well i still have the problem that i don´t have spark behind the coil

if the connector isn´t connected with the coil i just have power on one pin, if its connected i have power on all 4 pins

Don´t think that´s right.

 

Any ideas?

[Swazy 0 1 Cars]

Well i still have the problem that i don´t have spark behind the coil

if the connector isn´t connected with the coil i just have power on one pin, if its connected i have power on all 4 pins

Don´t think that´s right.

 

Any ideas?

 

Good news,

 

after a friend and me installed the loom out of 405 mi16 today we tried to started the engine, nothing happened But, we had spark and fuel what wasn´t given with the old loom.

We took the injectors out, they were closed, of course they weren´t used since 2,5 years.

After we cleaned them, the engine now runs for the first time, ok, without exhaust systems but it runs

I´m so happy

Now, i´ll take out the old loom, install the new one proper, finish the rest and the season can come

[DrSarty 90 1 Cars]

Well done dude. Now that's persiverence.

 

Chuffed for ya!

[Swazy 0 1 Cars]

Well done dude. Now that's persiverence.

 

Chuffed for ya!

 

with a fresh pair eyes everything will go on

now i can put everything together, just the loom has to go in proper

[yeti-dj 7]

"As i wanted to have more power under the bonnet, an automatic bonnet of course, i decided to get an MI.

Surely i needed new axles, so i stripped a late Griffe, i took everything i needed."

 

makes me sad that a limited edition is being broken when any old 1.9 has the same parts... why do it?

 

Any chance i can have the rear Griffe pillar badges, haha..

Edited February 15, 2008 by yeti-dj

[Emmy Seize 8]

It probably was a "late" Griffe indeed, so nothing to worry about.

Edited February 15, 2008 by Emmy Seize

[Swazy 0 1 Cars]

It probably was a "late" Griffe indeed, so nothing to worry about.

 

It wasn´t a late griffe, it was a late gentry.

[Swazy 0 1 Cars]

Question, how big is the chance to get 9x16 ET 25 Compo TH Mono under my car??

Any experience with this size on 205´s ?

[Swazy 0 1 Cars]

Some older pics of my last crash

[DrSarty 90 1 Cars]

Some older pics of my last crash

 

^^ Who didn't look at that picture and think..."hmmm, what could I scavenge off that?"

[Swazy 0 1 Cars]

^^ Who didn't look at that picture and think..."hmmm, what could I scavenge off that?"

 

As you can see there´s the old TU-Engine inside

The crash was the result when women means to turn the car on street and have no eyes for the traffic

But my car was repaired very quickly

[Swazy 0 1 Cars]

Some new pics from today.

Just removed the JAZ-Loom and inserted the Mi-one. Engine runs well but he won´t rev higher, don´t know why.

If i put the pedal to the floor the engine cuts, sometimes he dies

 

 

[Swazy 0 1 Cars]

Quick question, where is the difference between the yellow and the black injectors for 1,9 ltr. engines?

Wich will be better for my mi?

[Swazy 0 1 Cars]

Quick question, where is the difference between the yellow and the black injectors for 1,9 ltr. engines?

Wich will be better for my mi?

 

Wich injectors are best for the 1,9 ltr mi16 engines???? what would you prefer??? think that i need new ones

[Swazy 0 1 Cars]

Wich injectors are best for the 1,9 ltr mi16 engines???? what would you prefer??? think that i need new ones

 

No ideas wich injectors will be best for my mi16? or do you guys need more infos about my engine conversion?

[richsmells 2]

Yellow injectors are the standard injectors used on the Mi. They are the same yellow injectors used on the 1.9 8v Gti infact. They'll be fine.

[Swazy 0 1 Cars]

Yellow injectors are the standard injectors used on the Mi. They are the same yellow injectors used on the 1.9 8v Gti infact. They'll be fine.

 

I thought nobody wants to answer me So there´s no need to upgrate the injectors?!

[cybernck 402 1 Cars]

no and you couldn't properly use larger ones without remapping the ECU anyway.

 

you may want to get them cleaned though.

[Swazy 0 1 Cars]

no and you couldn't properly use larger ones without remapping the ECU anyway.

 

you may want to get them cleaned though.

 

well, i planed to install a programable system like omex or megasquirt one day. so i´ll start with original system first.

thanks for the answer cyber

[DrSarty 90 1 Cars]

I've got a set (of 4) Mi (Bosch yellow) injectors in excellent condition if you want them? £30 sent to you.

 

Rich

[Swazy 0 1 Cars]

I've got a set (of 4) Mi (Bosch yellow) injectors in excellent condition if you want them? £30 sent to you.

 

Rich

 

i already have a set, need to clean them first. if they won´t work i pm you thanks

[Swazy 0 1 Cars]

some other older pics wich were shown at peugeotperformance.net

 

 

 

 

 

these pics were taken in 2001 and 2002