skanny 0 Posted September 7, 2008 As the title really. I found out what was causing all the rattle when i out the fan blower on, as well as needing a bit of wd40 on the spindle my vin plate fell out when i pulled the fan out the bottom of the heater box! Where should it be positioned on the car so i can put it back. Share this post Link to post Share on other sites
welshpug 1,629 Posted September 7, 2008 behind the right hand strut top. Share this post Link to post Share on other sites
MrG 3 Posted September 11, 2008 wow, its a long way from home then? how on earth did it get there? Share this post Link to post Share on other sites
skanny 0 Posted September 15, 2008 wow, its a long way from home then? how on earth did it get there? I have no idea, I cant see another vin plate so im guessing that this is the right one for the vehicle. Well i checked the vin to the paperwork and its correct. No idea how the hell it got in there though. Share this post Link to post Share on other sites
Phil H 16 Posted September 16, 2008 Don't forget the VIN is also stamped on the shell on the forward edge of the front scuttle panel by the master cylinder. Share this post Link to post Share on other sites
nick9one1 2 Posted September 20, 2008 i read somewhere the vin was stamped in the rear left wheel arch too? Share this post Link to post Share on other sites
2-Pugs 57 Posted September 20, 2008 i read somewhere the vin was stamped in the rear left wheel arch too? That's either a different car or someone who doesn't know what they're talking about... The only place it's stamped into the bodyshell is on the scuttle adjacent to the VIN plate Share this post Link to post Share on other sites
Phil H 16 Posted September 20, 2008 That's either a different car or someone who doesn't know what they're talking about... The only place it's stamped into the bodyshell is on the scuttle adjacent to the VIN plate might mean on a CTI where they seem to have a shell number under the boot carpet? Share this post Link to post Share on other sites
