Would This Pass An Mot? (flexi's Being Mounted Like This)

[Turbo7379 3]

It you buy the 1.9 gti goodridge braided hose kit the flexi pipes that go around the axle already have a bulkhead fitting on both ends .

[Anthony 1,000]

Why are people making this so difficult? The standard hangers that secure the flexi's to the body do the job perfectly - the only thing that gives grief is the stud that secures it shears off, but just drill a hole next to it and use a regular nut/bolt

 

The bracket on the beam is fine as well, again, no need to change it unless you're running a full flexi-hose setup from the MC back to the calipers

[Jrod 7]

Only thing I found Anthony is when you connect the hose to the top one you have to run the copper line outside which is slightly akward.

 

This is why I recommend connecting it straight to the car and do away with the bracket.