Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Jonmurgie

Jenvey Throttle Bodies On The Mi16

Recommended Posts

Sam

A nice figure. Bit annoying the vid doesn't work, Quicktime sucks :)

Share this post


Link to post
Share on other sites
tom_m
A nice figure. Bit annoying the vid doesn't work, Quicktime sucks B)

 

the vid works fine... someone hasn't updated his quicktime! :)

Share this post


Link to post
Share on other sites
Sam

That didn't work either, gives me exactly the same error. Not to worry. I suspect I'm not the only one, do them in DivX next time :)

 

 

 

 

 

Bollocks, I have the latest s*ittime. Its the fact its made by apple.

Share this post


Link to post
Share on other sites
smckeown

sweet, can't deny back to back figures on the same RR.

 

I'll have trouble keeping up with that on the straights this year :)

Share this post


Link to post
Share on other sites
Mongo

Nice figures there Jon, i have pretty much exactly the same setup but mine hasnt been setup on rolling road (it was mapped years ago on the road) and has a mongoose system mated to the 4-2-1 manifold running 75mm trumpets. Hopefully get it on a rolling road soon!

Share this post


Link to post
Share on other sites
Jonmurgie
sweet, can't deny back to back figures on the same RR.

 

I'll have trouble keeping up with that on the straights this year :D

 

CHeers Sean, I appreciate that comment :)

 

LOL @ the 'on the straights' comment though B)

Share this post


Link to post
Share on other sites
smckeown

don't read it wrong, ure a nutter in the twisties :)

Share this post


Link to post
Share on other sites
engine killer

regarding to the 45mm tbs and inlet manifold issues, one side of the inlet manifold is 45mm id but how about the other side (the one attach to the head)? since i only have a 40mm inlet manifold (had a 40mm tbs before), someone is opening the manifold for me and told me that i cannot open the head side too wide (material not thick enough). the ports on the head are about 40mm id, will the big valve head needs bigger ports too?

Share this post


Link to post
Share on other sites
Jonmurgie

Just been putting the car into 'road' spec with a K&N Filter and the headlights back in... looks much more sedate now!

 

progress53.jpg

 

progress54.jpg

 

progress55.jpg

 

Hoping to have a drive of it later today... maybe... if it bloody stops raining!!

Share this post


Link to post
Share on other sites
C_W

Look nice! look very similar to CRF40s setup he had.

Share this post


Link to post
Share on other sites
RobMGti

Looking very impressive. As above it does remind me of the pics of CRF's car.

 

Watch the wheelspin :)

Share this post


Link to post
Share on other sites
Jonmurgie

Oh yeah, hand't spotted that!!

 

crf4503.jpg

Share this post


Link to post
Share on other sites
Alastairh

Finally.

 

Looks good, and not bad results.

Share this post


Link to post
Share on other sites
tom_m

tidy! had a spin (not literally i hope!) in it yet?

Share this post


Link to post
Share on other sites
Jonmurgie

Almost.. drove it round the corner to the nut & bolt place to get a few things, though didn't make it out of first gear! Hope for a drive tomorrow as I'd like to take it home for the weekend :D

Share this post


Link to post
Share on other sites
tidypug

I'm feeling a bit nervous for you. I hope it all goes ok;)

Share this post


Link to post
Share on other sites
GVK

Car sounded lovely on the Llandow vids and looked to be quicker than everything else - nice one.

 

Read the other thread about the power figures, every forum is the same then it seems.

 

What a load of waffle.

Share this post


Link to post
Share on other sites
Jonmurgie

Cheers mate... hope to be up at Cadwell in July so maybe see you out on track again :D

Share this post


Link to post
Share on other sites
Sign in to follow this  

×