Minigibbos '87 1600 Gti

[Ramigojag 19 1 Cars]

looks like a huge amount of work but good progress so far

[MiniGibbo 142]

Going to be cutting this up soon and using the Miami as the base car if anyone wants any panels off the red gti.

[MiniGibbo 142]

And that's the end of this chapter..

 

[welshpug 1,626]

what's the nearside wing and chassis leg/inner wing like?

[Juttie205 123 2 Cars]

im interested in the part under the wing that has the last wing bolt fixing near the windscreen if that makes sense the wing needs to be removed first

[MiniGibbo 142]

Without sounding too stupid I have no idea what you two said haha

 

When I detailed the bay to have a proper look it all looked in excellent shape compared to my two phase 1.5's.

[Juttie205 123 2 Cars]

ok will try and get pic for u

[welshpug 1,626]

errr, ok....

 

 

 

 

 

 

 

 

 

 

 

[MiniGibbo 142]

Haha.. Pretty good, no major rot and off the top of my head no surface either.. I'd need to check to be 100% though.

[Alan_M 66 1 Cars]

Still got the boot floor?

[MiniGibbo 142]

Nah cut the back half the car in two.. Aimed to do the car in quarters but ran out of discs for the front.

 

The front left corner has two little spots of surface rust under the washer bottle but nothing a wire wheel and kurust wouldn't sort and the rest is mint.

[Alan_M 66 1 Cars]

Nah cut the back half the car in two.. Aimed to do the car in quarters but ran out of discs for the front.

 

The front left corner has two little spots of surface rust under the washer bottle but nothing a wire wheel and kurust wouldn't sort and the rest is mint.

 

I'm after some repair panels for my boot panel, so only need 2 6"x6" squares or so.

[MiniGibbo 142]

Should be able to sort that out mate.

[Alan_M 66 1 Cars]

Should be able to sort that out mate.

 

Each half of the boot floor should do, if you can remove the other metal attached. That's what the original plan was with that ^ car anyway.