Search the Community

Hello all. Again it's me with more questions about spark and fuel. I have spent 2 weeks reading and trying to get spark and fuel based upon your guys previous help and the rest of the topics. I have read and annotated multiple different wiring diagrams etc to no avail. After I got the car started last time thanks to @DamirGTI, @welshpug, @SRDT and @petert, it spun a bearing first drive and I tore it down to find some chimp had assembled it and it was never going to run for long. (wrong crank, stem seals not on the guides, loose guides, main-cap bolts hand tight etc) I've rebuilt the engine and now I am at the stage again where I have no spark or fuel. I've changed the TDC sensor and I have a blue top ignition amp. Last night I stripped the loom and have taken notes of every wire and plug and where it goes into the ECU socket. I cant find a diagram for my ECU that is accurate to my two row ECU (Bosch Motronic 0261 -200 - 125) As I don't have the correct diagrams, I was wondering if someone could please tell me if the Coil and Ignition module (wrongly labelled AFM on my drawing) wiring looks correct? Its been butchered before and I feel like its wrong - hence no spark. I feel like the Purple & Yellow+Green should be swapped. Anyone also know what 2C is on the last photo diagram? (Highlighted in blue) Thank you all. Really need it up and running asap. Got a big trip in 3 weeks.

My Mi16 (XU9j4) seems to be running lean. When it had an MOT a couple of months ago the tester said it appeared to be very lean when he tested it. It also feels a bit flat when driving, though seems to idle OK. I know many things can cause this from fuel pump, AFM, sensors, etc. But any tips on what I should focus on checking first? I don't have any kit for testing fuel pressure, but can probably test most of the electrical things OK.

hello there.. i've a car fitted with a Mi16 2.0L(RFY) engine and i've an unused Mi16 1.9L(DFW) engine... can i swap the bottom end using the 1.9L? can this be done? which timing belt shall i use...2.0 or 1.9...is there any advantage by doing this... thanks