-
Welcome to 205GTIDrivers.com!
Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.
Search the Community
Showing results for tags 'Heater'.
Found 4 results
-
I've been following the guide to overhaul my heater fan which is great but I do have a couple of issue. 1. When I fit the plastic blades back on the spindle and try and secure the clip in place, the clip doesn't seem to clamp onto the the spindle and the blades + clip are able to slide up and down the spindle. I think this means the clip is mangled. Does anyone know how to fix this? Anyone know if it's possible to buy a new clip? 2. The motor only starts running when I turn the control knob half way. It does then speed up as you continue to turn the knob. Is this normal or should it start running before halfway? I have replaced the resistor with a new unit which didn't change the situation. Thanks Luke
-
I have recently looked at my seats in my CTI and removed some ugly and not working aftermarket seat heaters. The one who installed those seems to just have clipped the old cables straight off, but I connected them to the floor cables in what seemed the right way, though they do not seem to work. Might be that they were broke when the aftermarket parts were installed, but does anyone know how the connections should look and if I can check some things that may affect the heaters? Worth to mention is that the aftermarket one worked a bit on the passenger side so electricity is definitely running through the cables. Thanks in Advance! /Sebbe
-
Afternoon, First real post on the forum and I have a question regarding the heater. Has anyone managed to wire it so that the heater works on a simple toggle switch and is simply on at full speed (at its hottest setting) or off? I would like to remove the heater control unit which is fitted as standard as I'm building a whole new dash which doesn't really allow for a heater control unit to sit in the middle. Not fussed about having cold air or being able to change settings. Just want it to be on or off and for it to be at it's maximum setting. Thanks in advance, Andy
-
hi, im stripping my Gti and got stock on the heater. i can't remove it in order to replace it. are there any hidden screws? anything? thanks
