Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

205 XS 1.6
Apitiser
By Apitiser, 06/09/2020
  • 1,249 views
  • Country New Zealand
  • Color Grey
  • Year 1993
  • Short Description My 205 is an Australian 205 SI 1.6 which now resides in Vancouver Island, BC, Canada. I'm from NZ but lived in Australia for a few years where I owned this car before moving to Canada and bringing the pug with me. The SI is similar spec to a XS but has the XU5M3Z which is in the euro 1.6 auto model. It's in pretty solid condition and was originally purchased for $500AUD (£270)
  • Car Type / Usage Road car
  • Engine & Gearbox Standard
  • Suspension & Steering 306 shocks front and rear with 205 gti springs and rear anti roll bar
  • Brakes standard 247mm size but switch from solid to vented. Braided lines
  • Wheels & Tyres pretty much standard. I run the 13inch wheels with yoko a048s and they need 3mm spacers to not interfere with the vented brakes and pepperpots with a050s.
  • Bodywork & Exterior Standard
  • Interior & ICE newer head unit put in by previous owner
  • Comments & Plans I shipped the car over with a bunch of spare parts I plan on putting in the car bit by bit. I have a spare SI rear end with wider 306 arms, discs and b6 shocks. A spare GTI k frame to refurbish. some koni front shocks. A spare engine with shorter ratio gearbox. The si engine is an xu5m3z which is a monopoint injection 1.6. it has the big valve head. I plan on rebuilding this and doing some head work (skim, cams, triple angle seats etc) then adding itb's so it can rev freely to end up with a 205 similar to a rallye.
  • Like 1

×