M16 -> M10 Adaptor

[Guest Pedan]

I nedd to fit my 205 GTi oil pressure sender into my GTi180(EW10) engine. Anyone knows how to do this? Or can I use any other sender that works with oe gauge in my 205?

 

Sender : M10 * 1

Engine : M16 * 1,5

[Stu 18]

You need one of Miles' adapters buddy...

 

Click me for adapter goodness...

Edited December 10, 2008 by Stu

[M@tt 77]

you could get a sender from a GTI6 (part number 1131 71) this is a sender unit and has a M16*1.5 thread)

 

also found on 306 XU10J4 XU10J2 engines aand also in 405's and 806's

 

HTH

[Stu 18]

Don't the Xu10 senders over/under read on a 205 gauge Matt? I thought i remember somebody saying something once..

[Guest Pedan]

Thanks guys.

 

I found this one on LMA Performance.

OIL GAUGE T-PIECE M16*1.5(M&F) to M10*1(F). With this I will be able to connect my pressure sender in to M10*1 (F) and also connect pressure warning lamp sender into M16*1,5F and then the adaptor inot the engine who got an M16*1,5. Right?

[M@tt 77]

Yes it will connect up asa you say

 

if you only have one take off on the EW lump use one of those adapters.

 

I'd get it off Miles tbh as the thread on those LMA ones aren't brilliant, i bought one for my turbo conversion and wasn't overly impressed

[Guest Pedan]

Yes it will connect up asa you say

 

if you only have one take off on the EW lump use one of those adapters.

 

I'd get it off Miles tbh as the thread on those LMA ones aren't brilliant, i bought one for my turbo conversion and wasn't overly impressed

 

Ok, what's the problem then? Doesn't sound good.

 

And the senders from 306 doesn't work with 205 gauge?

Edited December 10, 2008 by Pedan