Bottom Arm Balljoint Bolt Bent

[meggy6620 0]

ye very true but going stronger on the ball joint cant realy hurt too much as it takes alot more to bend and snap.

 

Its a easy and cheep way of avoiding replaceing the hub.

 

But changing the hub would be the better choise as you dont need to faf around changing bolts and torque settings e.t.c and would be the safe way to go.

 

hope that helps.

 

Buy cheep buy twice!

[Jrod 7]

Can't go wrong with original peugeot if you ask me, they did design it afterall.

[meggy6620 0]

ye but did they design it to be realy strong or use it because it was cheeper for them to use a lower tensile botl?

 

but at the end of the day its beter to use origanls if you can.

[Rippthrough 98]

ye but did they design it to be realy strong or use it because it was cheeper for them to use a lower tensile botl?

 

but at the end of the day its beter to use origanls if you can.

 

 

They designed it so the bolt would stretch before you cracked the hub...

[meggy6620 0]

Ah ok lol, you learn somthing new every day.

[John_B 11]

They designed it so the bolt would stretch before you cracked the hub...

 

They stretch, I can vouch for that!

 

You've made me worry about buying the stronger ones now.

[Rippthrough 98]

They stretch, I can vouch for that!

 

You've made me worry about buying the stronger ones now.

 

 

Don't overtorque 'em, and don't slide into a kerb...

[meggy6620 0]

A bolts just a quick fix id still have a good look at you hubs.