200bhp 205 Gti6

[dean 0]

i have a 205 gti6 completley standard does any one no the cheapest way of getting it to 200hp

[Baz 421]

Tb's, Cams and management.

[GLPoomobile 958]

Naws

[dean 0]

what do you mean by naws

[cybernck 400 1 Cars]

that wasn't rather constructive, was it, but i guess what he meant was that it has been

asked many times (recently as well) and that the info will come up if you do a search .

 

or maybe it's an acronym for something along those lines .

[Baz 421]

Naws

 

 

Careful of the welds on the intake mind!!

[GLPoomobile 958]

that wasn't rather constructive, was it, but i guess what he meant was that it has been

asked many times (recently as well) and that the info will come up if you do a search .

 

or maybe it's an acronym for something along those lines .

 

Had he known that 'naws' means NOS or Nitrous Oxide injection, then it would have been a perfectly legitimate reply He's a chap of very few words so I though I'd reply with a single word answer.

 

Insurance might be interesting no matter what path he takes

 

(Controversial )

 

SWAT came into my house, disrespected my whole family because somebody narc'd me out! And you know what? IT WAS YOU!

Edited March 24, 2008 by GLPoomobile

[Baz 421]

[pip470 61]

I live my life a quarter mile at a time!!!! lol

[Jakob 1]

Tb's, Cams and management.

 

That would be the most expensice way IMO on a NA setup

[petert 550]

Just an inlet cam swap and aftermarket ECU will do the trick. Have a read of this:

http://www.aussiefrogs.com/forum/showthread.php?t=54941

 

Magic detuned it from 118kW at the wheels to 110kW to get a better spread of torque. There's a great video near the end.

Edited March 24, 2008 by petert

[dean 0]

what inlet cam would you advise is it not worth putting in a inlet and a outlet cam in. where do you get the after market ecu

[keith 0]

what inlet cam would you advise is it not worth putting in a inlet and a outlet cam in. where do you get the after market ecu

 

if you read the website, stage 1 will fit in and run fine, stage 2 will require an ecu remap.

 

you shouldnt need an aftermarket ecu, remapping will work okay.

[petert 550]

I've got someone doing a Stage II swap with a standard ECU at present. He's doing a before/after dyno results so will be better able to answer that question.

[DrSarty 90 1 Cars]

The exhaust side of things doesn't really need touching; from cam, to manifold and exhaust. It's all fine 'as is' for that power.

 

And I thought GLPoo's reply did mean 'do a search'.

[James_R 3]

Nitrous is the cheapest way, a straight 50shot would do it, and not cost much (apart from filling the bottle) an inlet cam and remap looks pretty good otherwise.

 

Just to add, I'd put money on a 6 engine's 205 with a diff being faster than a 200BHP one without though.

Edited March 25, 2008 by James_R

[Spiky 37]

but how about me, who has a 205 gti-6 with a diff

 

i'd like more power.

Edited March 25, 2008 by Spiky

[dean 0]

i have a tran-x plated diff in it were is the best place to get a remap

[Bakes100 20 1 Cars]

Best place to get a Gti6 engine remapped is Wayne at Chipwizards, if you get some kent pt81 cams and a good remap you should see around 190-195 bhp on a healthy engine.

[Spiky 37]

both cams or just inlet?

[James_R 3]

think they're a pair

[Bakes100 20 1 Cars]

The kent PT81 cams are a pair , although you can get a inlet cam from catcams or Petert's stage 2 jobby which would probly give you a 15 hp increase?? im sure he could confirm that for you.

 

For reference his quoted 118kw atw works out at just over 160 hp atw iirc.

[dean 0]

do you have a number for him so i can give him a ring also what have you had done to your engine to get 179.2 bhp

[welshpug 1,622]

+61 **** *** ***

 

best give it a few hours though.