Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
shooter mcgavin

No Gauges After 6 Transplant

Recommended Posts

shooter mcgavin

have now just about finnished my 205 gti6 and have followed all the info from here on the wiring side of things but the only gauge a have workin is the fuel gauge

 

oil pressure-needle goes to end on 2 clicks of the key, when started sits at 0

 

oil temp - not working

 

water temp-moves up half mark on 2 clicks of the key and thats it

 

oil warning light-not working

 

 

the engine came form a phase1 97 306

 

pretty sure i have connected up the right wires

 

 

can any1 shed some light on this

Share this post


Link to post
Share on other sites
nick

I reckon your oil pressure and oil warning light are connected the wrong way round, swap the wires and see what happens.

 

Nick

Share this post


Link to post
Share on other sites
CaptainK
I reckon your oil pressure and oil warning light are connected the wrong way round, swap the wires and see what happens.

I was about to say the same. The oil warning switch sensor has been wired to the gauge and the gauge sensor to the light.

Share this post


Link to post
Share on other sites
Spiky
have now just about finnished my 205 gti6 and have followed all the info from here on the wiring side of things but the only gauge a have workin is the fuel gauge

 

oil pressure-needle goes to end on 2 clicks of the key, when started sits at 0

 

oil temp - not working

 

water temp-moves up half mark on 2 clicks of the key and thats it

 

oil warning light-not working

the engine came form a phase1 97 306

 

pretty sure i have connected up the right wires

can any1 shed some light on this

 

 

fuel works as it has nothing tp do with conversion

oil pressure guage wont work unless you fitted pressure switch, else if you using 6's sensor, it's just a low pressure sensor

if it's flying to full, then it's being earthed

 

oil temp should work, you must have wired it up wrong :D

 

oil warning light should work, but i guess as said abov you have it linked to oil pressure guage, simple swap

 

water temp, must have used the wrong wire, there is 3 on the 6..lol

 

one is for ECU, one is for high temp, the other is for the gauge

 

go recheck :lol:

Share this post


Link to post
Share on other sites
welshpug

blue sensor on the gti6 is the one for the gauges, it has 2 pins.

 

green for ecu, brown for aircon-not used in a 205.

Share this post


Link to post
Share on other sites
Spiky
blue sensor on the gti6 is the one for the gauges, it has 2 pins.

 

green for ecu, brown for aircon-not used in a 205.

 

 

i stand corrected :D

Share this post


Link to post
Share on other sites
Sign in to follow this  

×