dean 0 Posted January 26, 2008 i drove my 205 gti6 home from pug1off from having the wiring done put it in my garage all i did to it was take the ecu and batter off for one night to do some work to the gear rods i put the ecu and batter back on today and it has no fuel pressure and wont start does any one have any ideas thanks Share this post Link to post Share on other sites
welshpug 1,627 Posted January 26, 2008 fuel pump fuse? are you getting spark? Share this post Link to post Share on other sites
dean 0 Posted January 26, 2008 were is the fuel pump fuse i havent looked for a spark tho Share this post Link to post Share on other sites
dean 0 Posted January 26, 2008 (edited) whats that and were is it Edited January 26, 2008 by dean Share this post Link to post Share on other sites
dean 0 Posted January 26, 2008 if a had hit the crank sensor when i was nocking the pin out the top of the gear selecter arm would this cause to have no fuel presure. also i put the battery on before the ecu and forgot i hadnt connect the ecu and i turned the engine over with the ecu disconneted could this be causing it Share this post Link to post Share on other sites
dean 0 Posted January 26, 2008 i have just disconnected the ecu and then tryed again and its now fine but thanks for your help Share this post Link to post Share on other sites
