Are Late Model Saxo Washer Jets Adjustable?

[mogsman 2]

Just replaced my old ones for the new saxo ones. I tried to adjust them upwards with a pin but the pin bent. The holes are squarish in shape. I was going to use a small screwdriver, but thought I would find out before I break one.

Ian

[mogsman 2]

Just had a go and they're not. They spray too low if you have an automatic bonet. So I've put the old ones back in.

Ian

[MikeHunt79 0]

That's strange - my saxo washers are adjustable (up down left right)... I used a drawing pin also... You have to wiggle it quite a bit, there's a bit of a knack to doing it...

[mogsman 2]

The ones I tried were the mist spray type with a small square hole instead of the metal hole.

Ian