Mi16 / S16 part help

[Richie-Van-GTi 81 2 Cars]

Is anyone running a 2.0 16v engine with the s16 alternator setup? (PAS but no AC)

I need the length of the alternator bar hole to hole if possible (or a bar if anyone has one for sale) it's item 6 in the below image.

 

 

[welshpug 1,735]

are you running  PAS or not? 

 

  its just a bit of flat bar, a small kink in one end to account for the misalignment, and two holes,   very easy to make, specific length isn't too important, just make sure the belt clears.

[Tom Fenton 1,635]

Sorry can't help, other than to say work backwards, buy a belt and mock it up, from that work out what length the link wants to be, and make something?

[welshpug 1,735]

if you're running no power steering, uae an 8v adjuster bolt and make a slotted strap with a 90° bend on the end for the draw bolt.

 

made this 18 years ago 

 

https://photobucket.com/share/8e07424f-f67b-4107-a0da-c19180b678df

[welshpug 1,735]

if you're running no power steering, uae an 8v adjuster bolt and make a slotted strap with a 90° bend on the end for the draw bolt.

 

made this 18 years ago 

 

https://photobucket.com/share/8e07424f-f67b-4107-a0da-c19180b678df

[petert 636]

I run LH & RH rose joints there. Mine has no PAS or AC.  I'll measure c/c distance later.

Edited 5 hours ago by petert

[Richie-Van-GTi 81 2 Cars]

I got the measurement from a guy on Facebook, I know about the bends in it, my pla now. Is to either laser cut a piece of stainless and then bend that to shape or make a stepped Aluminium bar which is threaded on the alternator end.

Sorry thought the Op said,  alternator and PAS but no AC, with PAS pump low down.

Thanks all

[welshpug 1,735]

I would have had to do some CArchaeology/bush whacking to measure mine