Fuel rail vacuum hose

[Deantracy17 1]

Hi. Started the car today and it ran awful. Missing, over reving, hunting etc. popped the bonnet and the vacuum hose from the air intake to the fuel rail was split and unattached. See photos. This is a Baker BM part only fitted last year. Seems fine on the fuel rail side, but the vacuum chamber has a larger fitting, which is where it split. I don’t want to get another one if it is going to only last a year or so. Can anyone recommend a more suitable and longer lasting replacement?  Thanks

Edited June 1 by Deantracy17
Can’t seem to upload images. I guess you will know which pipe I mean.

[PhilNW 67]

Same problem a good while ago

 

If you are not bothered about originality, get 2 lengths of silicon vacuum hoseto match the ends  (samco or similar) and a reducer/joiner (cant remember where I got mine from)

 

Not had any problem since

Edited June 1 by PhilNW

[welshpug 1,722]

Drop Stew a message.