Disassembling a dizzy

[Pierre_b 3]

Hello,

 

I have my dizzy that is leaking oil, and I would like to disassemble it and try to understand from where it's leaking, but I am stuck here :

 

 

 

There is a pin through the shaft on the head side, but I can't take it out, even with some persuasion with a pretty big hammer. Any advice?

 

Thank you,

Pierre

[petert 567]

It has a labyrinth seal, so there's no serviceable parts. Send it to H&H.

[Tom Fenton 1,531]

That pin is tight but can be pressed out.

 

I can't recommend H&H as they sent a dizzy back to me that I fitted to a guys car and it did about 50 miles before it broke down on him, because they'd left a load of screws loose inside it. Never again.