DKZ cam specs

[Rich101 0]

Can anyone help me out with the complete specs for a DKZ cam shaft? I need to time one up properly with a Vernier pulley and have searched post after post and can find every other cam spec but not the DKZ! 

Thanks in advance 

[SRDT 146]

First there is more than one, it's either before 05/1992 or after and each part number was replaced by a newer one so they should be close enough but not identical:

 

http://prepparts.free.fr/docs/catalogue/cataloguepeugeot/GB/205N/0/08A50A.HTM

 

I have specs from engines that should have the same camshaft as up to 05/1992 DKZ:

 

Camshaft with two white rings between the cams on cylinder 2

Lift intake/exhaust: 11,5/10,5mm

With 1mm valve clearance
IVO 6° before TDC
IVC 48° after BDC
EVO 43° before BDC
EVC 1° after TDC

From an older document (both are from Citroën bdw):

Lift intake/exhaust: 11,5/11,5mm

With 1mm valve clearance
IVO 5°09 before TDC
IVC 48° after BDC
EVO 43°04 before BDC
EVC 1°10 after TDC

[petert 550]

Think of it this way. The inlet lobe is from a D6B. The exhaust lobe is from a DFZ. Dial the inlet lobe in at 109 LCL and it will be sweet.

[Rich101 0]

Thank you both, I don't know if it's the older or newer one unfortunately, it was second hand and dare I say it from Spooks so I'll have to measure the inlet and exhaust lift with a dial gauge to double check which one it is first but that should then give me what I need 

 

Thanks again