Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
Gohn

205 Manual Steering Rack

Recommended Posts

Gohn

I've always had the power assisted steering but recently have wondered what its like without

I have the Si rack, and according to an earlier post its 2.7 lock to lock

 

Not doing any track/rally racing or anything, just tooteling

 

I could either just disconnect the power steering belt and go with no power on my current rack or

 

Get a proper manual rack and install that

 

dont know what the lock to lock on a manual rack is and how they feel

will driving my rack without power get annoying after a while

and what are the manual racks like on the highway

 

 

Share this post


Link to post
Share on other sites
petert

The Si rack is pretty quick at 2.7:1. Only the Xsara VTS at 2.4:1 is quicker. The GTi PAS option was 3.2:1 and the non-PAS is 3.7:1. I have an Si rack in the race car and I can assure you it's an absolute pig to drive without assistance. The pump failed once. It's an absolute dog to get out of the pit garage. I couldn't imagine what it would be like in suburbia. The non-PAS rack is hopeless in comparison and feels very vague. It's a case of the grass is always greener on the other side. Believe or not, you have the best solution with the Si assisted rack.

Edited by petert

Share this post


Link to post
Share on other sites
camgti

Add the Si rack to you current power steer setup. Job done, happy days. Should all be plug in. Worth the effort 100%

Share this post


Link to post
Share on other sites
Gohn

cheers already done

might drive around without the power steer belt on for a bit though

just to feel the weight of the Si rack without power assist

then put the belt back on when my forearms look like popeye

Share this post


Link to post
Share on other sites
petert

Let us know how it goes Popeye.

  • Haha 1

Share this post


Link to post
Share on other sites
welshpug

taking the belt off wont do the trick as you will still be fighting the pas ram.

Share this post


Link to post
Share on other sites
Gohn

ah yes, didn't think of that

maybe that was why peter found his to be so heavy when his pwr steer pump broke

another miss on my part

what if I loop a short hose between the two ram pipes with just air in it ?

that way when the rams going in and out theres plenty of give and not the usual hydraulic resistance

think maybe that will work while I give it a try

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×