Junior1 0 Posted September 13, 2020 Hi all, I'm thinking of upgrading my gear linkage as it was a bit slack before coming off the road. Am I right in thinking I have an MA series box? Its a 4 speed from a 954cc 1990 205. I've seen a few kits online but unsure of quality if anyone could recommend one? Also is there a particular brand of oil those boxes prefer? Cheers! Share this post Link to post Share on other sites
welshpug 1,621 Posted September 13, 2020 any decent 75w80 non ep oil will be ok, oem is/was total, they have changed to a straight 75w oil in the last few years which will work in the older boxes, dealers are reasonably priced. as for linkages I think miles at pugracing does some to suit your car, possibly baker bm also, I'd only use stuff from those two. Share this post Link to post Share on other sites
Junior1 0 Posted September 13, 2020 21 minutes ago, welshpug said: any decent 75w80 non ep oil will be ok, oem is/was total, they have changed to a straight 75w oil in the last few years which will work in the older boxes, dealers are reasonably priced. as for linkages I think miles at pugracing does some to suit your car, possibly baker bm also, I'd only use stuff from those two. Thanks mate, I'll have a nosey now Share this post Link to post Share on other sites
SRDT 146 Posted September 14, 2020 There is a Ø7mm roll pin on the gearbox that's well known to induce play on the lever, 8b on the picture: Share this post Link to post Share on other sites
Junior1 0 Posted September 18, 2020 On 9/14/2020 at 6:17 PM, SRDT said: There is a Ø7mm roll pin on the gearbox that's well known to induce play on the lever, 8b on the picture: Thanks mate Share this post Link to post Share on other sites