MattCPR 2 Posted November 29, 2017 Hi, I’m in the middle of restoring a 1990 1.9 in Cherry Red. I imagine I am going to be on here a lot picking all of your brains for help and advice. One thing so far I’m slightly stumped on is having sorced 2 brand new genuine new doors I need to try and figure out what kind of Rivnut I need for the exterior door handle to bolt to. Cars going into Paint at the weekend so will hopefully start with the rebuild over Christmas. Any replies are greatly received. Thanks, Matt. Share this post Link to post Share on other sites
pugdamo 111 2 Cars Posted November 29, 2017 It's been a while but I thought the male part of the thread was in the door handle and it just had 2 10mm nuts on it. Share this post Link to post Share on other sites
MattCPR 2 Posted November 29, 2017 No just above the door handle hole to the right hand side is a rivnut with a thread in. Must be a bolt that goes through the handle into it. Stripped this car about 2 years ago and then got busy with other ‘paying jobs’ so it’s been put to the back. Share this post Link to post Share on other sites
jackherer 543 Posted November 29, 2017 Part number 6941 15 from your local Peugeot dealer. RRP is £1.74 each. You might want to make an account on http://public.servicebox.peugeot.com Share this post Link to post Share on other sites