Weser 30 Posted April 25, 2015 Hi all. Replacing my bushes and got the L lever off and bushes out. There is a a spacer through the lever which the bushes are pressed into. Now I'm hissing that's not supposed to rotate? Mine rotates about 10deg. Is the best thing to put a little weld on it or press it back together in a vice? Share this post Link to post Share on other sites
cheesegrater 43 1 Cars Posted April 25, 2015 (edited) My understanding is that the bronze bushes are pressed in and shouldn't move. The sleeve is not pressed in and acts as the point of movement when the bolt clamps the whole lot down. Edited April 25, 2015 by cheesegrater Share this post Link to post Share on other sites
allanallen 528 2 Cars Posted April 25, 2015 I welded mine to stop it moving Share this post Link to post Share on other sites
Weser 30 Posted April 25, 2015 Ahh good I welded mine as well. Was sure it wasn't supposed to move. Gears feel a lot better. Share this post Link to post Share on other sites
