Lower Engine Mount. Which Models Share?

[Bovien 6]

Which models share the aluminium engine mount? The one that have the drive shaft going through it. I need to find a new one at a salvage yard, but need to know which Peugeot models and engine sizes (not engine codes) uses this to be interchangable with the 1.9.

 

Thanks!

[welshpug 1,651]

Any xu and xud bolted to a be box.

[jackherer 543]

As above, it is the XU/BE combination you are looking for, the mount has to line the driveshaft up with the diff.

[Bovien 6]

So actually only GTI? Both 205 and 309?

[welshpug 1,651]

no, as mentioned ANYTHING with an XU or XUD engine with a BE box bolted to it.

[Bovien 6]

thanks, that helps a lot! My issue is that salvage yards in DK only gives car model and engine size. But from your description almost alle 205/309/405 and a lot of citroen would have that, as long as they are manual. Sadly I need to order this online or on phone. Sadly very few i talk to know anything more that said engine size and model.. I'll take a drive to the nearest places I think.. THanks again

[welshpug 1,651]

I could sell you one, depends what the postage cost would be VS what a breaker would charge in your country ?

 

with a 205, anything 1580cc upwards, same goes for the 405 and 309, BX, the 306 Xsara ZX, its anything 1.8 up because the 1.6 is a TU engine.