Blue Connector On Gti 6 Loom

[sale_gti6 2 1 Cars]

What it is for? It's 2 pin connector. Yelow/green and yelow wires. It's not oil temp gauge sender and Ect sensor connector...

Edited December 5, 2013 by sale_gti6

[welshpug 1,627]

on the front of the engine near the starter motor/alternator?

 

PAS pressure sensor.

[sale_gti6 2 1 Cars]

Yes. In front end under the intake

[sale_gti6 2 1 Cars]

on the front of the engine near the starter motor/alternator?

 

PAS pressure sensor.

Where it should be connected?

[welshpug 1,627]

the HP line from the PAS pump to the rack.

[sale_gti6 2 1 Cars]

the HP line from the PAS pump to the rack.

Ok. So that is not necessary on my 205? I don't have PAS pump?

[Stu 18]

Yep, all it does it raise the idle when the pump loads up; like an anti-stall.

[sale_gti6 2 1 Cars]

Thanks a lot! :-)

[rikky 37]

there's a few unused ones, you'll find others, vapour canister plug amongst others - aircon etc