Changing Xu10 Crankshaft Seals

[dave205 19]

As above really, how long will it take and difficult is it? Ghe engine will be on the engine stand so access wont be an issue. Anything to watch out for as ive never done any before.

 

Also does anyone have the part number and price for them? Its the xu10 2.0 turbo engine im refering go.

 

 

[pugpete1108 62 1 Cars]

search for a for sale on here someone is selling both ends for £5.50 delivered.

 

gearbox end is easy once you get the flywheel off etc, not done the timing end for a while so cant quite remember but should be easy with the engine on a stand.

[pug_ham 242 3 Cars]

With the engine on a stand, one side is just as easy as the other, just the cambelt end needs the belt removing & pulleys taking off the crank tail.

 

g

[calvinhorse 870]

Christ that's cheap, I gave £26 for the clutch side from a stealers, I was desperate at the time

[pug_ham 242 3 Cars]

Christ that's cheap, I gave £26 for the clutch side from a stealers, I was desperate at the time

I paid under £25 for both Payen crank seals from my local motor factors when I needed them urgently.

 

g

[calvinhorse 870]

Is that oe quality G? I'm guessing yes knowing you!

 

[welshpug 1,627]

They are one of the brands that make o.e stuff

[pugpete1108 62 1 Cars]

I used a payen large one on my xu10 and seemed good quality

 

Whilst in the loft the other day found a gen pug one still sealed from about 5 years ago ill be using that in the xu7

[pug_ham 242 3 Cars]

Is that oe quality G? I'm guessing yes knowing you!

They are one of the preferred quality brands for things such as head gaskets & engine seals imo & possibly the same as you'd get from Peugeot for more money.

 

g

[pugpete1108 62 1 Cars]

This pug one looks exactly the same as the payee one.