Has Anyone Got A Map For The Xu10J2Te For An Omex 500/600?

[Terry1600 14]

has anyone got a map for the xu10j2te for an omex 500/600?

[Terry1600 14]

bump! ive currently got a base map loaded but its way off, anyone feeling generous enougth to sell me one and donate one :-D. im on standard engine so a map from aomeone elses omex on 406 sri engine will work good enougth to drive it to the rollers. cheers in advance, Terry

[welshpug 1,622]

Miles might have

[stef205 91 1 Cars]

Ring guy at omex

 

(null)

[Terry1600 14]

i got a map from Guy at omex but its way too rich to run properly and idle

[Miles 331 1 Cars]

Nope, but 500 and 600 map's are very different so you need to post which system you have

[Terry1600 14]

i have the 500 and i have a map that i am willing to send to somebody to get it somewhat close and pay to do. i can give live info from the car if need be. just to tie me over until i can afford to have it on the rolling road. cheers. Terry

[welshpug 1,622]

if you know its rich and have a wideband, why don't you back the fuel off yourself?

 

or just get it trailered to the RR.

[Terry1600 14]

i dont know how to adjust the map, omex have told me to adjust the mspb, it revs ok at 130 but is still rich and they said that its way too high and it should be at 40, but at 40 it dosent run. Terry p.s its the mapping fees im trying to avoid not the transport!

[welshpug 1,622]

RTFM...

 

http://omextechnology.com/500v3.02.pdf

 

 

I doubt you will save a decent mapper much time at all, and any I know charge by the day so as long as it takes them less than the day you wont be charged any more.