Thicker Head Gasket

[petert 554]

I'm looking for a thicker head gasket for an XU10J4 I'm building, in order to keep the CR down a bit. There is a thicker gasket available for the XU10J4R at 1.40mm (0209T9) and a 1.45mm (0209P0) for the XU10J4TE. Does anybody have any other suggestions?

[welshpug 1,626]

I found recently that corteco is the o.e manufacturer

 

they list 414352P for the RFT (XU10J4/Z)

 

1.5mm

 

also 414351P

 

RFX (XU10J2C)

 

1.55mm

 

 

http://www.corteco.com/en/products/online-catalogue/

Edited March 20, 2012 by welshpug

[petert 554]

Thanks, I had a look there but couldn't work out how to buy anything on-line. I'm building a 2.1L engine for my Mi16x4 and want to keep the CR at 11:1 max. I may need to take a lick off the piston crowns, as I'd like to use a Cometic gasket.

[welshpug 1,626]

you'd just need to find your local motorfactor and order one I guess!

[NNN 1]

Peter I can supply stainless / carbon steel 3 part custom gaskets. They are as reliable as any other racing multilaminar gaskets and can be custom cut to any shape and thickness.

Cost depend on size... around 95usd plus shipping for a single unit... I would guess it`s around 120-125usd with shipping to Australia...

Contact me if you are interested...