Ryan 99 Posted March 3, 2012 Tucked behind my fusebox there's a black plastic holder with either a diode or a resistor in it (can't tell which without removing the glovebox and dropping the fusebox out of the way). Is this normal? I couldn't find anything on the Haynes wiring diagrams. Share this post Link to post Share on other sites
dch1950 37 1 Cars Posted March 3, 2012 Hi Ryan Diodes used in this sort of area are usually used to de-spike relay coils. So, is it associated with an additional relay in, or around the fuseboard. Dave Share this post Link to post Share on other sites
Ryan 99 Posted March 7, 2012 This is the part I'm talking about: It's not on any of the wiring diagrams. Is this a standard part, or has it been added afterwards? If original, what circuit is it fitted to (I can't put it out far enough to read the wire numbers)? Share this post Link to post Share on other sites
cRaig 281 1 Cars Posted March 7, 2012 Do you have aircon? Ive found something similar in the loom I am attempting to fit Share this post Link to post Share on other sites
Ryan 99 Posted March 7, 2012 No, it was just a bog-standard 1.6 when I bought it. The only option fitted was remote central locking. Share this post Link to post Share on other sites
dino20vt 3 Posted March 7, 2012 I've definitely seen one before and it could be to do with the driving lights but I don't know what makes me think that?! 1 Share this post Link to post Share on other sites
dch1950 37 1 Cars Posted March 7, 2012 Hi Ryan, was it a diode or a shunt resistor ? Dave Share this post Link to post Share on other sites
Ryan 99 Posted March 8, 2012 I pulled the fusebox out as best I could without unplugging everything, and it's a diode. One side goes to the relay in the engine bay (dim/dip relay?), the other side is connected to wire 32M, which shares a pin in the fusebox with wire 32. Neither of these wires are on any of the wiring diagrams. Share this post Link to post Share on other sites
ade 4wd 11 Posted March 8, 2012 I can confirm it is a diode for the dim-dip relay. Share this post Link to post Share on other sites