christopher 5 1 Cars Posted June 21, 2011 (edited) I have driven a few 205's throughout the years and the only one that didn't have steering wheel shake was my 205 GTI 1.9. I drove this on the german autobahn at 135mph and it was totally steady and the steering wheel never shook at all. So now I am driving my 22 year old 205 Euro Rallye where the steering always shakes a bit. (But only above 85mph or so) But it would be really nice if it was totally still. Question is what is the cause of this? The answer is surely lots of things. So how can I make this possible. Here is a list of items that I have changed through the years. New wishbones (Standard) New Upper Engine mount (Standard) New Gearbox mount (Group N) New Shocks and springs New tyres with balancing So what could be the cause now. The only things I can think of is.. Driveshafts?? Front hub bearings Lower gearbox/engine mount Comments and suggestions welcome:-) Edited June 21, 2011 by christopher Share this post Link to post Share on other sites
welshpug 1,737 Posted June 21, 2011 typical causes would be wheel balancing or tyre damage, wheel damage as well. could be diff bearings seeing as its an MA and they arent renowned for their strength, inner cv joints can cause opdd symptoms too. Share this post Link to post Share on other sites
christopher 5 1 Cars Posted June 21, 2011 typical causes would be wheel balancing or tyre damage, wheel damage as well. could be diff bearings seeing as its an MA and they arent renowned for their strength, inner cv joints can cause opdd symptoms too. Well I have old steel wheels but new balanced tyres on them. Share this post Link to post Share on other sites
C_W 3 1 Cars Posted June 21, 2011 My 205 was pretty smooth when the wheels were balanced. I have a lot of issues with my BMW which is very sensitive to wheel balance including the rear. As above the most likely culprit is always the wheels and tyres, even if a wheel is balanced it may be smoothish but a bit of tyre runout could cause wobble (can be seen when spun on a wheel balancer). Other than that ensure there brakes are completely free and not slightly binding. Other than that it might be hub or as above, something to do with the drivetrain. Share this post Link to post Share on other sites
Jeffers_S13 0 Posted July 12, 2011 Worn bushes can also cause shake through steering wheel. Share this post Link to post Share on other sites
jeremy 71 Posted July 14, 2011 Try changing the track rod ends. Share this post Link to post Share on other sites