Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
stuart1298

205 1.6 To 2.0 8v Turbo

Recommended Posts

stuart1298

the pipe that connects to the back of the water pump housing and goes to the front of the car for the rad, and has a hose from the top for the expansion tank, which sits on the drivers side wing on the xm, but on the 205 its on the passenger side, so i'm kinda stuck. as the xm tank wont fit in the wing

If i keep the 205 tank, and run it maybe to rad or thermostat will this be ok, obviously blank the other pipe off, i no the expansion tank nees to be the highest part off the coolant system, but wasnt sure if this would be ok...

 

Stu

Share this post


Link to post
Share on other sites
pug_ham

Not exactly sure what you are asking but is this topic any help? :D

 

Try to keep it as close to the standard 205 coolant piping to save future issues with hoses imo.

 

Graham.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×