MerlinGTI 3 Posted September 16, 2010 Quickie question please gents. I might be getting some new rimmage and would like to know the PCD and offset (and any other relevant info that might help) of the standard 1.9 rim and Dimma fronts only. While we are on the subject what tyre size are dimma fronts? 195/16? Cheers Share this post Link to post Share on other sites
blessed6383 0 Posted September 16, 2010 im sure the standard ET (offset) is around 12 or 14 and think the PCD is 108 for pugs/citroen will be corrected if am wrong tho as for dimma sizes im unsure as yet to own a set Share this post Link to post Share on other sites
welshpug 1,737 Posted September 16, 2010 standard 1.9 ET is 19mm, and they are 6" wide, not 100% sure on the dimma figures, but I think they were 7" wide fronts and 8" rears, ET0 front and -8 on the rear. tyres from memory were 205 on the front and 225 rears, both 45/16. Share this post Link to post Share on other sites
MerlinGTI 3 Posted September 16, 2010 cheers guys big help Share this post Link to post Share on other sites
dino20vt 3 Posted September 19, 2010 (edited) I've got a set I'm dismantling at the minute (Dimma split rims that is). Mine are shod in 215 40 16's and are 8 inch wide, but from what I can tell they seem less dished than dimma fronts so unsure of offset. http://i238.photobucket.com/albums/ff195/n...09052009056.jpg http://i238.photobucket.com/albums/ff195/n...09052009057.jpg http://i238.photobucket.com/albums/ff195/n...09052009058.jpg Edited September 19, 2010 by dino20vt Share this post Link to post Share on other sites
