Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
PhilNW

1.9 Road Rally Engine Spec

Recommended Posts

PhilNW

Just about to strip down 1.9 GRP N spec engine and looking for ideas for upgrade to get a few more horses , such as bigger valves, change cam, skimmed head without going overboard money wise

 

Cheers

 

Phil

Share this post


Link to post
Share on other sites
welshpug

1.6 pistons, nice cam, someone to look over the head, mapable management, that would be my approach.

 

you can't really go that far on the 8 valve wqithin road rally regs because you have to retain the single throttle body intake, so unless you fabricate something that improves on the standard inlet significantly, you are fairly limited.

 

aftermarket management will help massively, as you aren't relying on an AFM to cope with pretty large pulses you'll get from more overlap and higher compression.

Share this post


Link to post
Share on other sites
large

You could put split carbs on

Share this post


Link to post
Share on other sites
matt.f

Basically what you have said, had all the above done and a bit more and mine has been rolling roaded at 150bhp and operator said it would do more when run in,coupled to a 1.6 box and 4.4cwp with Tran-x diff it flies!not cheap though as you are prob talking £1700 for full rebuild

Share this post


Link to post
Share on other sites
Sign in to follow this  

×