Jump to content

Welcome to the brand new 205GTIDrivers.com website! We hope you'll enjoy it! Read the full notice here.

  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Kobayashi

[misc_work] 205 Gentry Euro-spec/manual

Recommended Posts

Anthony

Ah, I didn't realise that was your car - it looked great in the metal! :D

 

(I was in the black UK registration 205 on the Dolomiti Drive in September, where the last picture was taken)

Share this post


Link to post
Share on other sites
welshpug

Needs griffe/goodwood colour scheme on the wheels to finish it off i think :D

Share this post


Link to post
Share on other sites
Kobayashi

Ah, I didn't realise that was your car - it looked great in the metal! :D

 

(I was in the black UK registration 205 on the Dolomiti Drive in September, where the last picture was taken)

 

Thank you.

 

I know woho you are - it's easier the other way round as both of you are some sort of VIPs here :-)

 

 

Needs griffe/goodwood colour scheme on the wheels to finish it off i think :D

 

I agree - will do that some day...

 

It still won't be the correct green colour however, but I am not taking details like that all too serious.

It's not like I am trying to build a complete replica or to "fake" something. It's more sort of a tribute to the real goodwood and maybe to the whole british racing heritage.

And the result looks more appealing to me than a Gentry. That's why I actually planned to do this little "conversion" for years.

Edited by Kobayashi

Share this post


Link to post
Share on other sites
arran1511

Looks good, you planning on lowering it by about 25mm too? or keeping it high and dry?

Share this post


Link to post
Share on other sites
Kobayashi

thanks. no real changes planned here.

the car was fitted with Bilstein B4 dampers and Peugeot Sport springs in the front some years ago.
the springs should be -22mm but I guess the front is now -10 to -15mm compared to standard GTI (not Gentry) ride height.
the rear sits a bit higher, because the gentry torsion bars have not been fiddled with. it seems like they have bed in over time however, because the difference in ride height between front and rear is barely noticeable.

 

naturally, there is considerable body roll and the rear end tends to get loose in tight corners. this is actually quite fun to play around with, but clearly the rear suspension would benefit from stiffer torsion and anti roll bars.

I might even go full 1.9 gti (disc brake beam) when the rear beem needs refurbishment some time in the future.

this car has the 1.6 beam setup, i.e. wide track in front and narrwow track with drum brakes in the rear.

 

However, this is not a priority, and the car is already quick and so much fun around corners.


fahrwerk-familienfoto_qgsa.jpg

Edited by Kobayashi

Share this post


Link to post
Share on other sites
calvinhorse

Lovely car :)

Share this post


Link to post
Share on other sites
RafGentry

Hey Koba! This is a really lovely example of euro spec Gentry. I think it's a time for an update :)

Share this post


Link to post
Share on other sites
Kobayashi

Thanks for your interest.

 

Well, yesterday I changed the fuel pressure regulator in an attempt to stop the engine from over-fueling heavily. It seems that I succeeded, engine runs OK now.

 

Other than that, I am simply driving the car on sunny weekends, starting from as early as february 1st :)

Edited by Kobayashi

Share this post


Link to post
Share on other sites
Kobayashi

more misc work, more great drives:

 

refurbished front wipers

17bq2m.jpg

 

2p9qa2.jpg

 

3hbjtd.jpg

 

fiddled with front valance and auxiliary lamps

dsc_0053x1keq.jpg

 

dsc_0051wujad.jpg

 

dsc_00552ijqy.jpg

 

and, lately, hit the Nockalmstraße, one of those fantastic alpine driving roads here in Austria

p8100059_kl6srat.jpg

 

p8100061_kl5nrhe.jpg

 

p8100066_2_kls6rfu.jpg

 

Share this post


Link to post
Share on other sites
Kobayashi

It's about time to do the annual wrap-up for 2015:

- car got a new catalyser and exhaust

- clutch cable snapped and was replaced

- intake manifold was switched to a plastic one

- some work was been done to dodgy electrics (both cooling fans had failed just the day before a planned drive in the alps with a bunch of fellow pugs)

 

Apart from that mountain drive with other 205s that I finally managed to participate in, I also hit the iconic Großglockner Hochalpenstraße. This is just fantastic.

p9270102gos5h.jpg

p9270101ebs0j.jpg

p9270090b1ud3.jpg

p92700810ns0z.jpg

Edited by Kobayashi

Share this post


Link to post
Share on other sites
Anthony

The 205's still looking great :)

 

How I miss those glorious Alpine roads...

Share this post


Link to post
Share on other sites
Kobayashi

Hi Anthony, you should totally do this again :)

How bout this year?

Share this post


Link to post
Share on other sites
Kobayashi

 

Welcome everybody to the Peugeot 205 1.9 GTI "Goodwood" (No. 1 of 1) :P

 

 

 

finally completed :wub:

IMG_20180609_132809_s.jpg

IMG_20180609_132631_s.jpg

IMG_20180609_132551_s.jpg

IMG_20180609_132531_s.jpg

  • Like 1

Share this post


Link to post
Share on other sites
Daxed

Looks great, nice job.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×