Fridays Puzzle

[jimistdt 1]

Obviously it's a wishbone, but what's it from?

 

.

[welshpug 1,691]

do you know?

 

 

I think it might be Jap or Ford?

Edited June 11, 2010 by welshpug

[jimistdt 1]

Yes, well, I kinda know. It's definitely a Pug item, just need to be 100% sure which.

[welshpug 1,691]

hmm, 107 possibly.

 

if that's the case it is Jap

[TT205 42]

Looking at your Avatar Jimi

 

It's clearly her special rabbit!

[pug309twin40s 1]

basic 205/309 wishbone?

[jimistdt 1]

Yes, it should be one of the above, either 205/309, but can anyone ascertain which it is by the measurements given? The winner get's a packet of biscuits* *Max value 69p

[shalmaneser 26]

I'm going to say 205. 50/50 chance of getting it right and I want some biscuits.

[jimistdt 1]

Anyone?

[Paul_13 212 1 Cars]

It's a 309 driveshaft mate, just measured against old one.

 

I'll collect biscuits when i'm in Leeds next

[GeorgeXS 32]

It's a 309 driveshaft mate, just measured against old one.

 

I'll collect biscuits when i'm in Leeds next

 

No, that wishbone is not a driveshaft.

309 wishbone Jimi!

Bourbons would be lovely

[ade 4wd 11]

It looks nothing like a base model 205/309 wishbone. I am looking through my peugeot parts cd, those biccys are mine.

[Paul_13 212 1 Cars]

Oops wishbone

[james_pug 26 1 Cars]

309 wishbone, im sure my 309 one measured 319 center of bush to center of ball joint.

[welshpug 1,691]

the hole for the ARB is on the wrong axis for a 205-309 base model.

[ade 4wd 11]

Pic of 309 non gti wishbone.

[jimistdt 1]

Thanks for the help chaps, it's worth noting that it is definitely a triangle arm, it looks a little odd as it's only the side elevation. The reason I have only showed this side is all the other dimensions remain the same (ie the distance between the two subframe bushes).

 

So, are we saying beyond all doubt that this is a 309 bone? It could be a costly mistake if it isn't......

[jord294 95]

is this another offer for group buys, dicounts and offers jimi

 

did you get my pm about last friday ?

[jimistdt 1]

Looking at your Avatar Jimi

 

It's clearly her special rabbit!

 

 

Funny you should say that, when I found the picture wish and bone were words not far from my lips!

[welshpug 1,691]

I'd say it is NOT a 309 arm.

 

have you got picture of the top elevation?

[jimistdt 1]

For your viewing pleasure....

 

[welshpug 1,691]

doh, that looks to be a 309 arm, withholding that one confused matters greatly

 

 

so what exactly was the purpose of this thread?

[jimistdt 1]

doh, that looks to be a 309 arm, withholding that one confused matters greatly

 

 

so what exactly was the purpose of this thread?

 

 

Purely to establish the type of arm in the drawing Mei, nothing sinister. I agree that the lack of webbing cast into the arm makes it 309-esque, however I have also seen 205 arms cast in a similar manner. The only way, as far as I'm aware to distinguish between the two would be the total distance marked as 319mm in the top picture. Whether the 319mm is for the 205 or 309 arm I have not been able to tell exactly.

 

There is a purpose behind it all, but I must identify the arm shown.

[ade 4wd 11]

It was the 20.5mm hole in the first drawing that threw me as it isnt used for anything.

I have a 205 wishbone i will measure when i get home, should help you identify if its 205 or 309.

[jimistdt 1]

That would be great Ade if you'd do that.