2.0 Turbo Vss

[rory1 1]

Hi

 

I've been searching for wiring for a three pin speed sensor for my turbo conversion.

 

Needing a bit of help, anyone know about where I connect the 3 wires into the 406 loom?!?!? Any thoughts/help appreciated!!

 

Thanks,

Paul

[Daviewonder 533 3 Cars]

Pin 1 goes to a switched live, pin 2 goes to earth, pin 3 goes to pin 9 on ecu.

[rory1 1]

Pin 1 goes to a switched live, pin 2 goes to earth, pin 3 goes to pin 9 on ecu.

 

Cheers, will get that wired up tomorrow!

 

Do you know if it's a standard 16 pin diagnostic plug that it uses?

 

Thanks

Paul

Edited May 21, 2010 by rory1

[Daviewonder 533 3 Cars]

Cheers, will get that wired up tomorrow!

 

Do you know if it's a standard 16 pin diagnostic plug that it uses?

 

Thanks

Paul

 

I'm not sure what you mean mate?

[rory1 1]

I'm not sure what you mean mate?

[/quo

 

Do you have a diagnostic plug wired up to yours?

[Daviewonder 533 3 Cars]

I have one but its not wired in yet, its 3 pin on the 2.0 turbo.

[rory1 1]

I have one but its not wired in yet, its 3 pin on the 2.0 turbo.

 

Cheers, will need to try and find a 3 pin plug. Do you know where the plug will be in a 406 - inside the car or in the engine bay? I'm going to the scrap yard tomorrow so going to have a look for 1

[Daviewonder 533 3 Cars]

The one I got was near the battery box and ecu, it's a brown plug with a black blank plugged into it.

[rory1 1]

The one I got was near the battery box and ecu, it's a brown plug with a black blank plugged into it.

 

Cheers, i'll have a look for 1 tomorrow.

 

Thanks for all the help

[Daviewonder 533 3 Cars]

No problem