Retro Pug 0 1 Cars Posted March 28, 2010 A mate of mine bought a 106 XN 1.1 as a runabout while in university. Trouble is the brakes are very poor and he seems to need pads and discs every 5-6 months?! I need to double check but I think he has the 3 stud hubs so I suppose he's quite limited? I was thinking about an AX GT set up would this work or is there just a better calliper that will bolt on? I've got my old 1.6 hubs, discs and callipers would these fit? As he's in uni he's of course on a tight budget, plus he returned from a lecture to find someone had bumped his passenger door and rear quarter and just driven off! Any ideas would be very much appreciated! Share this post Link to post Share on other sites
welshpug 1,622 Posted March 28, 2010 (edited) if he's on 3 stud its a lot easier to get a set of struts from a scrappy off a 4 stud car, then you can use standard saxo/106 (and 1.9 205) vented discs no probs with your 1.6 calipers. 205 hub assemblies don't fit the 106. Edited March 28, 2010 by welshpug Share this post Link to post Share on other sites