gerallt_p 0 Posted March 1, 2010 Im looking to put my brake and fuel lines inside the car and wondering where's the best place buy the piping, from a search I've found that a copper nickel pipe of 3/16" will be what i need? VWP is the only site im considering at the moment but was wondering if anyone on here could recomend anywhere else for comparison . The lines dont seem to be the same size, I presume the fuel line is of a larger diameter? The car is a 205 xs running on twin carbs. Many thanks Gerallt Share this post Link to post Share on other sites
welshpug 1,737 Posted March 1, 2010 any motorfactor can supply what you need for very little, not sure on the cost of Cupronickel pipe but I re-piped most of my ZX for less than a tenner in a full roll of Copper pipe and 12 unions, still had some spare pipe fuel line is indeed larger diameter, 8mm IIRC. Share this post Link to post Share on other sites
dumbiron 0 Posted March 1, 2010 Making brake pipes goes one of two ways, either very infuriating or very therapeutic (guess what i am up to today ) Share this post Link to post Share on other sites
