nickaliath 22 Posted February 13, 2010 Hello all, Im thinking of developing some new arches for the 205 for rally and road cars to make it wider. They will be similar to the ecosse antares, but more bubbly and wider. The width will be similar to the front arches on this car: The rear arches will be the same width as the front. Im thinking of bringing the arches round to the bottom of the bumpers instead of stoping on the top part? Share this post Link to post Share on other sites
omega 82 Posted February 13, 2010 (edited) if you make them down to the bumpers it might be a idea to make them in seprate parts,so if you need to take the valance/bumper off you dont need to take the arch off. Edited February 13, 2010 by omega Share this post Link to post Share on other sites
nickaliath 22 Posted February 13, 2010 yeah good idea, i'd probably do it similar to the way my mercedes arches are split Share this post Link to post Share on other sites
welshpug 1,627 Posted February 13, 2010 maybe a separate extension part on the bottom would be better, like the Gutmann kits shown on the mighty turbo skip; http://www.psooc.com/forum/attachment.php?...mp;d=1260310755 Share this post Link to post Share on other sites
nickaliath 22 Posted February 13, 2010 wont let me visit that link says i dont have permission ?? can you link pic?? Share this post Link to post Share on other sites
welshpug 1,627 Posted February 13, 2010 it is a linked pic, guess you need to sign up to the PSOOC forum then Share this post Link to post Share on other sites
nickaliath 22 Posted February 14, 2010 did that but it still wont let me?? Share this post Link to post Share on other sites
Henry Yorke 269 3 Cars Posted February 14, 2010 These are the Gutmann Racing Look 2 ones which should come all the way down to the sill at the back The Racing Look 1 Kit was split with a part that bolts onto the standard front valance Share this post Link to post Share on other sites
nickaliath 22 Posted February 14, 2010 yeah similar principle to that, but more bubbly arches. Also i dont want it to wrap around the bumper lower. Share this post Link to post Share on other sites
jbarnes 1 Posted March 20, 2013 I know its an old topic, but where did you source those arches from and did you develope the ones mentioned Share this post Link to post Share on other sites