A2TheA 0 Posted September 2, 2009 (edited) infact im looking into the aerocatches for my FG auto bonnet skin. just looking for some pointers when cutting FG or tips on what to look out for. i have read the article on the drivers website but i didnt know if aerocatches were different/harder to cut. Thanks all Edited September 2, 2009 by A2TheA Share this post Link to post Share on other sites
swordfish210 20 Posted September 2, 2009 infact im looking into the aerocatches for my FG auto bonnet skin. just looking for some pointers when cutting FG or tips on what to look out for. i have read the article on the drivers website but i didnt know if aerocatches were different/harder to cut. Thanks all Wear a dust mask The FG dust gets everywhere. I fitted 4 aerocatches to my FG bonnet (and a Dzeus clip to the front centre to stop it lifting) and it was pretty easy. I just marked it out with permanent pen then used a dremel to cut it out Share this post Link to post Share on other sites
EdCherry 34 1 Cars Posted September 2, 2009 What mark said. I got a dremel hear if you want to borrow it aaron, might need to pickup some more 'consumables' for it though as its last escape used alot of discs! Share this post Link to post Share on other sites