1.9 Mi16 Rebuild

[timmsy19 3]

Hi all

 

I know this might have been covered many many times before but im lookng to start buying the parts to rebuild my 1.9 Mi16.

 

Im looking to rebuild it with the intention of puttin some cams in for lower down torque and then afterwards get some jenveys fitted on emerald management

 

what i need to know is a list of parts to do the re build including suppliers

 

Any help appriciated

[pugman211 0]

QEP (forum sponsor is your best bet. They are a supplier on here and if you drop them an email, they will send you one back with the usual parts for rebuild including prices!

 

Very helpful people.

[sussex_gti 0]

Qep ar only in Hassocks in West Sussex mate, only 25 miles from Eastbourne, probably worthwhile popping down there and talking directly to them, very knowledgeable and friendly people.

[timmsy19 3]

got an email back now with most of the details needed.

 

might pop over that way soon though for a browse

[sussex_gti 0]

Nice one, good luck with the re-build. Am 16v'ing mine, might have to pop over and have a nosey when its done.

[DanteICE 72]

got an email back now with most of the details needed.

 

might pop over that way soon though for a browse

 

I am going to rebuild my Mi16, what sort of prices and parts did they offer you?

 

Geoff

[DanteICE 72]

I decided to email them myself to find out what they offer, here is the response:

 

Hi,

 

I can offer you a 25% discount off the list price on the Mi16 parts (see price list below).

 

The flywheel are £120 + Vat exhange and we charge a £50 + Vat deposit which is refunded when your old unit is returned.

 

Regards

 

Matthew Saville

Quality Engineered Products

UK Distributors for Catcams

+44 1444 243720

www.q-e-p.co.uk

www.catcams.co.uk

 

 

 

MI16 Rebuild Parts Retail With Discount

 

 

Head Gasket BR510 £18.34 - 25% = £13.75

 

Head Set DR510 £110.90 – 25% = £83.18

 

Lower Gasket Set EL650 £44.99 – 25% = £33.74

 

Head Bolts HBS038 £25.46 – 25 % = £19.09

 

Main Bearings AEM5510 £53.62 – 25% = £40.21

 

Big Ends AEB92256 £78.72 – 25% = £59.04

 

Thrust Washers AEW2317 £16.90 – 25% = £12.68

 

Piston Rings R60190 £116.74 – 25% = £87.56

 

Cam Belt Kit K015206 £113.00 – 25% = £84.75

 

Cambelt Only 5206 £27.08 -25% = £20.31

 

Liner Seals HR566 £27.66 – 25% = £20.75

 

Valve Stem Seals VSK220 £12.80 – 25% = £9.60

 

Oil Pump LP2294 £104.90 – 25% = £78.68

 

Water Pump FWP1476 £44.64 – 25% = £33.48

 

ARP Rod Bolts 117-6101 £74.00

 

Mi16 Liner set (std) 89430110 £315.53 -25% = £236.65 (Set)

 

Hydraulic Followers UCF405 - Ultra £150 Set of 16

 

Jenvey Inlet Manifolds MP02 £180

 

QEP Exhaust Manifold Angling Plate Kit £75

 

 

 

Catcams

 

4900526 Steel Billet. Inlet Only £217.03 – Pair £547.93

 

Suitable for std engine & ECU. Inlet cam can be used with std exhaust for fast

 

road use. Drop in on std engine.

 

 

4900527 Steel Billet Pair £547.93

 

Sutiable for std inlet but with Mappable ECU/Carbs/T'B's

 

Fit std engine without mods. Check piston/valve clearance but usually OK.

 

 

4900528 Steel Billet Pair £547.93

 

Suitable for Carbs/TB's and modified fuel/ignition settings.

 

Head needs machining for inlet cam lobe clearance

 

Piston/Valve clearance very close – CHECK!!!

 

Capable of producing 100BHP/Litre on std head.

 

Powerband 3500 – 7500Rpm

 

 

Vernier Pulleys CTPE007 £219.54

 

 

High Comp Pistons - £560 set (Iapel)

 

 

 

All above prices are excluding VAT

 

What do you guys think?

 

Geoff

[jackherer 543]

I decided to email them myself to find out what they offer, here is the response:

 

 

 

What do you guys think?

 

Geoff

 

You could've pm'd him on here, his username is Mattsav

 

 

I've had work done by them a few times and never had a problem, they go out of there way to sort you out, and Matt has a 205 Mi16 himself so knows what its all about.

[DanteICE 72]

Fantastic good to know, but are the parts they supply the best that can be used for an Mi16?

 

Geoff