aCe 0 Posted April 27, 2009 Just fitted my lower OMP strut brace and it hitting on the lower engine mount casing. The casing is the one that the lower bushed is pressed into and secures the O/S drive shaft. I have had a check and all the mounts show no signs of perishing etc, i have just polybushed it all but dont think that would change any thing?. Any other suggestions? I have had one of these before and didnt have this problem HELP Share this post Link to post Share on other sites
Tom Fenton 1,526 Posted April 27, 2009 Have you fitted it upside down? This is the only way I can think of it hitting the lower engine mount, it is cranked downwards and forwards to clear it. Share this post Link to post Share on other sites
MrG 3 Posted April 27, 2009 I must admit I have yet to fit mine as it appears that I won't have the space to get a ratchet in to bolt it all up, have to get it on a ramp and have a proper go. Do these lower mounts actually help? Share this post Link to post Share on other sites
tom_m 0 Posted April 27, 2009 is it this way round? Share this post Link to post Share on other sites
aCe 0 Posted April 27, 2009 Lol yes thats def the way i fitted it I don't understand either as had no problem with my last one, it's so annoying as its vibrating through the chassis!!!!!!!1 Share this post Link to post Share on other sites
damien 22 1 Cars Posted April 28, 2009 mine hits the lower engine mount and vibrates the dash to bits, ive just put up with it now but some soild engine mounts have helpped abit Share this post Link to post Share on other sites