Moz_Goodwood 0 Posted April 13, 2009 whats the best to stick the rubber seals onto the metal work? as mine are coming away slighty in some places would superglue be any good? as ive got some lying around cheers paul Share this post Link to post Share on other sites
willmounsey 1 Posted April 13, 2009 I dont see why superglue wouldn't work but would it eat into the rubber after a while?? Tigerseal good sticky stuff and if the rubbers were replaced in time tigerseal can be removed quite easy with a bit of heat. Will Share this post Link to post Share on other sites
SurGie 54 Posted April 13, 2009 Try using flexible silicone, it'l stick it well and is water proof and easily removed, JD... Share this post Link to post Share on other sites
joe1joe 3 Posted April 14, 2009 do u mean the door seal? if so u can take it off and squeeze it with ur fingers which close up the gap(there is a metel strip in there) or you are on about somthing esle ...... Share this post Link to post Share on other sites