Rear Disc Brake Slider Pins

[Super Josh 4]

I sometimes get a clonk from my rear disc brakes when moving off. So I assume that my rear slider pins must be worn?

 

Anyone know where to get them from? Or is it main stealer only

 

 

Cheers,

 

Josh

[welshpug 1,626]

check that the slider bolts are actually clamping the sliders properly, I had an issue where a build-up of corrosion in the threads mean that the bolt would go very tight but not actually secure the caliper fully, I sent a tap through all the holes which are fully threaded, and cleaned the bolt threads, this solved the problem

[Super Josh 4]

check that the slider bolts are actually clamping the sliders properly, I had an issue where a build-up of corrosion in the threads mean that the bolt would go very tight but not actually secure the caliper fully, I sent a tap through all the holes which are fully threaded, and cleaned the bolt threads, this solved the problem

 

 

That sounds like a cheaper and easier option, time to get the tap and die set out, cheers

 

 

 

Josh