2052006 10 Posted March 29, 2009 I intend on not using the heat exchanger oil cooler thing on my vts engine - how do I fit just the filter on the block though - there is no screw, if I take the cooler off. Can i somehow remove the one from my 8v? If so how? Share this post Link to post Share on other sites
allanallen 528 2 Cars Posted March 29, 2009 I intend on not using the heat exchanger oil cooler thing on my vts engine - how do I fit just the filter on the block though - there is no screw, if I take the cooler off. Can i somehow remove the one from my 8v? If so how? you just need to screw in the hollow stud thing off you 8v engine. their a bit of a bastard to get off but it can be done. If not they dont cost a lot from peugeot. Share this post Link to post Share on other sites
2052006 10 Posted March 29, 2009 OK, thanks. Thought this would be the case, but couldn't see how to unscrew the threaded bit, without ruining the thread! Any tips? Share this post Link to post Share on other sites
Alastairh 47 Posted March 29, 2009 Tap a torx T45 into stud and it can be retracted easily. But they are sub £5 from memory from Pug. Al Share this post Link to post Share on other sites
2052006 10 Posted March 29, 2009 Cheers mate - I'll have a go tomorrow. Share this post Link to post Share on other sites
Ryan 99 Posted March 29, 2009 £1.27 from Pug, part number 1103 54. Share this post Link to post Share on other sites
Alastairh 47 Posted March 29, 2009 £1.27 from Pug, part number 1103 54. Perfect! What more could you ask for? Share this post Link to post Share on other sites