djinuk 2 Posted March 16, 2009 ok , i will be doing the gti6 conversion, but before i put the lump in , i want it clean and grease/oil free. I made a start yesterday, but toook a couple of pics to see if any of you lot have any idea where this could of come from. So far to clean the area ive started with some cheap ass oven cleaner, now moving onto gunk degreaser. Share this post Link to post Share on other sites
welshpug 1,622 Posted March 16, 2009 hard to say without seeing the block with the starter motor and inlet out of the way. Share this post Link to post Share on other sites
djinuk 2 Posted March 18, 2009 right well at some point soon i will remove the inlet and starter etc, and begin getting the block clean, hope i remmber where all the damn breathers etc to come Share this post Link to post Share on other sites
welshpug 1,622 Posted March 18, 2009 there's only two breathers on the gti6 engine, really easy. Share this post Link to post Share on other sites
djinuk 2 Posted March 28, 2009 ok pics as promised. Share this post Link to post Share on other sites
M@tt 77 Posted March 28, 2009 (edited) looks like the oil is coming out the pressure switch, fit a new washer before you put everything back on Edited March 28, 2009 by M@tt Share this post Link to post Share on other sites
djinuk 2 Posted March 28, 2009 is there a diagram of what each of the sensors do. Share this post Link to post Share on other sites
M@tt 77 Posted March 28, 2009 http://forum.205gtidrivers.com/index.php?showtopic=99387 Share this post Link to post Share on other sites
Spiky 37 Posted March 28, 2009 thats the other oil pressure switch i told you about mine leaks from there too will sort before i put mine back together take the sendor out, go to a motor factors and get a washer the same Share this post Link to post Share on other sites
djinuk 2 Posted March 28, 2009 wow great link, i tried to search but did not find this, thank you Share this post Link to post Share on other sites
