Fitment Guide To Peugeot Offsets

[Paulmac19 4]

After i bought a set off alloys without considering the offset

i thought this wee post might save anyone from making the same mistake

hope its helps out somone!

YEAR

PCD

OFFSET

BORE

 

106 3 stud

91>

3-98

5-15

55.1

 

106 4 stud

91>

4-108

15-20

65.1

 

106 GTI

96>

4-108

15-20

65.1

 

205/309

84-99

4-108

15-25

65.1

 

206

98>

4-108

20-25

65.1

 

306

93-01

4-108

15-20

65.1

 

307

01>

4-108

15-25

65.1

 

405

97-97

4-108

15-20

65.1

 

406 not V6

95>

4-108

15-25

65.1

 

605

90-99

5-108

35-45

65.1

 

607

01>

5-108

35-45

65.1

 

607 V6

01>

5-108

35-45

65.1

 

Partner

93>

4-108

15-20

65.1

[jeeves 0]

What does the Offset range mean?

 

Would a set with 16mm offset fit for example or would they rub on the inside?

 

Also does the bore make any difference if it was bigger than the standard 65.1??

 

This is on a 205 1.6 with 1.9 rear beam

 

Cheers

[Henry Yorke 269 3 Cars]

What does the Offset range mean?

Cheers

How far the centre face of the wheel is from the rims

 

Would a set with 16mm offset fit for example or would they rub on the inside?

Should be OK with up to 7J rims as long as your beam is OK and not sloping in

 

Also does the bore make any difference if it was bigger than the standard 65.1??

You can fit wheels with a larger centre bore if you use a spigot ring to reduce the bore size to the correct one. If the centre bore is smaller, then the wheels will need to be machined to fit on the car.

[welshpug 1,627]

Would a set with 16mm offset fit for example or would they rub on the inside?

 

Depends how wide they are.

 

Also does the bore make any difference if it was bigger than the standard 65.1??

 

yes, you'd get vibration due to the wheel not being correctly seated on the hub.