NeilGTi85 5 Posted November 4, 2008 Hello All, I've got a coolent leak from the stat housing which I now know is the gasket between the cyl head and the housing, I also need to replace the thermostat. So I thought while I was doing that I might aswell replace the sensor's. There's a Green (Coolent Temp Sensor?), Brown (Which I've also been told is a coolent temp sensor??) & a Blue one (Temp Senosr?). Has anyone got any tips on how to do this? (Pic's would be good) I know there's 3 bolts holding the housing on so that part should be ok Cheers Neil Share this post Link to post Share on other sites
NeilGTi85 5 Posted November 4, 2008 (edited) Found this Pic which is very usefull, I take it all the sensor's just unscrew? Neil Edit - Just orderd the new thermostat with gasket and also the gasket for between the cyl head and the housing, all 3 sensor's for £56 from Peugeot themselve's!! Edited November 4, 2008 by NeilGTi85 Share this post Link to post Share on other sites
M@tt 77 Posted November 4, 2008 you don't need the cooling fan one as the 205 has a seperate switch in the radiator for that. Share this post Link to post Share on other sites
NeilGTi85 5 Posted November 4, 2008 I've recently brought a new rad from Nissans which I dont think have the switch?? I've also brought a twin fan setup of ebay for £26 (bargin!) Neil Share this post Link to post Share on other sites
welshpug 1,629 Posted November 4, 2008 use the switch from your old Rad. Share this post Link to post Share on other sites
