jimmer 0 Posted September 21, 2008 Does any body know what the max flow/bhp the std gti6 injector is? Running at 3 Bar fuel pressure. Any help much appreciated. Share this post Link to post Share on other sites
welshpug 1,622 Posted September 22, 2008 the figure of 286cc springs to mind, but IIRC Sandy commented that they flowed quite a bit more than the spec suggests. Share this post Link to post Share on other sites
DrSarty 90 1 Cars Posted September 22, 2008 the figure of 286cc springs to mind, but IIRC Sandy commented that they flowed quite a bit more than the spec suggests. Sandy also said that he's swapped and changed about his injectors, settling on the '6 due to a 'nice spray pattern'. So flow rate is not necessarily the deciding factor. Share this post Link to post Share on other sites
Sandy 189 Posted September 24, 2008 Quite, mixing quality is a big factor in the effective rate of injectors. The GTi6 ones seem to work equivalent to an average 300cc injector, despite being rated officially at 265cc @ 3 bar. It will also depend on what ECU is used, because of how tightly they control the opening and closing. Share this post Link to post Share on other sites
kutija 1 1 Cars Posted May 17, 2009 Are IW 204 gti-6 injectors high or low impendance injectors? Share this post Link to post Share on other sites
kutija 1 1 Cars Posted May 18, 2009 Thought so. Thanks... Share this post Link to post Share on other sites