Peetypug 5 Posted September 11, 2008 i sold a 306 xsi engine, converted loom and unlocked ecu it was running fine when i took it out the guy has fitted it but it now wont start he says he isnt getting any power, no dash ilumination the battery is charged and its all earthed any ideas? Share this post Link to post Share on other sites
Peetypug 5 Posted September 11, 2008 i'm not near the engine so can only write what he tells me which wire from the black box on the slam panel goes to the battery positive? Share this post Link to post Share on other sites
Miles 331 1 Cars Posted September 11, 2008 Not knowing how he is qualified to install or do electric's I would start off with the basic of basic's and be wary of any advice as it could lead to more problems, I know not that helpful but what you may think of being easy can be difficult to other's Share this post Link to post Share on other sites
Peetypug 5 Posted September 11, 2008 its sorted now Thanks anyway. It was the wire from the black box to the + on the battery that wasn't connected. Once on it started first turn Share this post Link to post Share on other sites