Hardgraf 0 Posted June 16, 2008 Hello Just got an S16. Got the loom with ECU in a cardboard box. None of it is labelled. Planning on converting to my ph1.5 1.6 205. Is the wiring simple enough or is it a sh*t? Is there a wiring guide anywhere on the net? Also, would y'all advise changing the 1.6 drive shafts? I intend to use the 1.6 box. The engine has been port & polished, fast road cam etc, I think about 180bhp. Thanks Share this post Link to post Share on other sites
DamirGTI 323 Posted June 16, 2008 (edited) Regarding the loom/wiring , you can download 306 Haynes manual here : http://rapidshare.com/files/122873022/Peug...anuals.rar.html Rgs ! Damir Edited June 16, 2008 by DamirGTI Share this post Link to post Share on other sites
Hardgraf 0 Posted June 17, 2008 Regarding the loom/wiring , you can download 306 Haynes manual here :http://rapidshare.com/files/122873022/Peug...anuals.rar.html Rgs ! Damir Thanks Also, would tou recommend turning the engine over now & again If it's sat on my garage floor for a month or so? If so how do you do it? Trying to learn as I go along here! Share this post Link to post Share on other sites
